Production process
NaBond_Aluminium nanoparticle is produced by laser evaporation process. The raw material used is high purity Aluminium. This process enables us to make high purity, small particle size, high active Aluminium nanoparticles in large quantity and low cost.
Applications
Efficacious catalyzer-Adding aluminum nanoparticle into the solid fuel propellant of rocket improves combustion speed, substantially increase combustion heat and combustion stability.
The superficial conductive coating processing of metal and non-ferrous metal-Thanks to its high-active surface area, aluminum, copper and nickel nanoarticle can coat under oxygen-free condition below smelting point of the particles. This technology can be used for the manufacture of microelectronic devices.
Actuating sintering additive-As nanoparticle has large surface and superficial atom ratio, it is in high energy state, it has good sintering ability even under low temperature, it is an efficacious sintering additive, at about 300 degree sintering will happen to ALN(AL) nanoparticle, and visible sintering neck will produce. Mixing 5-10% ALN nanoparticle into ALN particles can improve the sintering processes of ceramic with high heat-transfer performance, increase density and thermal conductivity of sinter. Provided it is used to make basilar plate of components, the thermal conductivity will grow by 10 times, therefore the problems of integrated level of integrated components is properly solved.
|
